NXR-ILM08C-ECT

21

Power supply with through wiring

An example is shown below.

Connect the external power supplies to the power supply connector (input) of one IO-Link Master Unit.

Then, connect the power supply connector (output) of the Unit to the power supply connector (input) of another IO-Link Master Unit with a

power supply cable.

In this way, connect a power supply cable between the subsequent Units with through-wiring one after another.

Description

Feature

Connect the external power supplies to the power supply connector (input) of one IO-Link Master

Unit. Then, connect the power supply connector (output) of the Unit to the power supply connector

(input) of another IO-Link Master Unit with a power supply cable. In this way, supply power with

through-wiring between the subsequent Units with power supply cables. The power supply

connector (output) is used.

Through-wiring can reduce the overall

length of the power supply cables used in

the system.

Power supply connector (output)

(PWR OUT)

Power supply cable between Units

Power supply

connector (input)

(PWR IN)

Power supply cable

Unit/input power supply

Output power supply

Power supply cable between Units

IO-Link Master Unit

IO-Link Master Unit IO-Link Master Unit

Power supply

cable

I/O connectors

(P1 to P8)

Power supply

connector (input)

(PWR IN)

To external

devices

Power supply

connector (output)

(PWR OUT)

Unit/input

power supply

Output

power supply

Internal

circuits

Internal

circuits

Internal

circuits