LPC2292 datasheet(33/54 Pages) PHILIPS

33 / 54 page

LPC2292_2294_6

Product data sheet

Rev. 06 — 10 December 2007

33 of 54

NXP Semiconductors

LPC2292/LPC2294

16/32-bit ARM microcontrollers with external memory interface

[1]

Conditions: VSSA =0V, VDDA = 3.3 V.

[2]

The ADC is monotonic, there are no missing codes.

[3]

The differential linearity error (ED) is the difference between the actual step width and the ideal step width. See Figure 5.

[4]

The integral non-linearity (EL(adj)) is the peak difference between the center of the steps of the actual and the ideal transfer curve after

appropriate adjustment of gain and offset errors. See Figure 5.

[5]

The offset error (EO) is the absolute difference between the straight line which ﬁts the actual curve and the straight line which ﬁts the

ideal curve. See Figure 5.

[6]

The gain error (EG) is the relative difference in percent between the straight line ﬁtting the actual transfer curve after removing offset

error, and the straight line which ﬁts the ideal transfer curve. See Figure 5.

[7]

The absolute voltage error (ET) is the maximum difference between the center of the steps of the actual transfer curve of the

non-calibrated ADC and the ideal transfer curve. See Figure 5.

Table 8.

ADC static characteristics

VDDA = 2.5 V to 3.6 V; Tamb = −40 °C to +125 °C unless otherwise speciﬁed. ADC frequency 4.5 MHz.

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

VIA

analog input voltage

VDDA

Cia

analog input

capacitance

--1

differential linearity

error

[1][2][3]

±1

LSB

EL(adj)

integral non-linearity

[1][4] --

±2

LSB

offset error

[1][5] --

±3

LSB

gain error

[1][6] --

±0.5

absolute error

[1][7] --

±4

LSB

LPC2292 데이터시트(PDF) 33 Page - NXP Semiconductors

LPC2292 데이터시트(HTML) 33 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

데이터시트 다운로드

링크 URL