BM83 datasheet(70/76 Pages) MICROCHIP

70 / 76 page

The full text of the EU declaration of conformity for this product is available at www.microchip.com/design-centers/

wireless-connectivity/.

12.3.3

Helpful Websites

A document that can be used as a starting point in understanding the use of Short Range Devices (SRD) in Europe is

the European Radio Communications Committee (ERC) Recommendation 70-03 E, which can be downloaded from

the European Communications Committee (ECC) at: http://www.ecodocdb.dk/.

Additional helpful web sites are:

• Radio Equipment Directive (2014/53/EU):

https://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/red_en

• European Conference of Postal and Telecommunications Administrations (CEPT):

http://www.cept.org

• European Telecommunications Standards Institute (ETSI):

http://www.etsi.org

• The Radio Equipment Directive Compliance Association (REDCA):

http://www.redca.eu/

12.4

Japan

The BM83 module has received type certification and is labeled with its own technical conformity mark and

certification number as required to conform to the technical standards regulated by the Ministry of Internal Affairs and

Communications (MIC) of Japan pursuant to the Radio Act of Japan.

Integration of this module into a final product does not require additional radio certification provided installation

instructions are followed and no modifications of the module are allowed. Additional testing may be required:

• If the host product is subject to electrical appliance safety (for example, powered from an AC mains), the host

product may require Product Safety Electrical Appliance and Material (PSE) testing. The integrator should

contact their conformance laboratory to determine if this testing is required

• There is an voluntary Electromagnetic Compatibility (EMC) test for the host product administered by VCCI:

www.vcci.jp/vcci_e/index.html

12.4.1

Labeling and User Information Requirements

The label on the final product which contains the BM83 module must follow Japan marking requirements. The

integrator of the module should refer to the labeling requirements for Japan available at the Ministry of Internal Affairs

and Communications (MIC) website.

For the BM83 module, due to a limited module size, the technical conformity logo and ID is displayed in the data

sheet and/or packaging and cannot be displayed on the module label. The final product in which this module is being

used must have a label referring to the type certified module inside:

For the BM83 module, due to a limited module size, the technical conformity logo and ID is displayed in the data

sheet and/or packaging and cannot be displayed on the module label. The final product in which this module is

being used must have a label referring to the type certified module inside:

005-102168

12.4.2

Helpful Web Sites

• Ministry of Internal Affairs and Communications (MIC): www.tele.soumu.go.jp/e/index.htm.

• Association of Radio Industries and Businesses (ARIB): www.arib.or.jp/english/.

BM83

Appendix A: Regulatory Approval

Datasheet

DS70005402C-page 70

BM83 데이터시트(PDF) 70 Page - Microchip Technology

BM83 데이터시트(HTML) 70 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

데이터시트 다운로드

링크 URL