TLOU267(F)

2007-10-01

2

Characteristic

Symbol

Test Condition

Min

Typ.

Max

Unit

Forward voltage

―

2.0

2.4

V

Reverse current

―

―

50

μA

Luminous intensity

(Note)

85

200

―

mcd

Peak emission wavelength

―

(612)

―

nm

Spectral line half width

Δλ

―

15

―

nm

Dominant wavelength

―

605

―

nm

(Note):Lamps are classified into the following ranks according to their luminous intensity, and packed in boxes

by

each rank. N: 85

−230 mcd, P: 153−414 mcd, Q: 272 mcd−

Precaution

Please be careful of the followings

• Soldering temperature: 260°C max

Soldering time: 3 s max

(Soldering portion of lead: Up to 1.6mm from the body of the device)

• If the lead is formed, the lead should be formed up to 1.6mm from the body of the device without forming stress

to the resin. Soldering should be performed after lead forming.

• This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure

that it will not be affected by this IR light.