900 MHz Indoor Wireless Ethernet Radio

This new product allows you to build non-line-of-sight, point-to-multipoint wireless Ethernet

connections that connect “fringe” IP devices, including IP access control readers, remote printers,

remote PCs, VoIP phones, point-of-sale devices, digital signage or industrial control devices.

The AW900iTR radios include a built-in spectrum analyzer and they are IP addressable with web

browser based remote configuration and diagnostic tools included. A small LCD panel on the front of

the unit can also verify proper operation at a glance. The radio’s case is rugged extruded aluminum

and is designed to meet C1D2 standards for hazardous environments (certification pending). A DIN Rail

mounting clip is provided on the case back to facilitate installation in industrial equipment cabinets.

AvaLAN’s products offer the ideal combination of price, range, data rate, security, interference

avoidance, quality-of-service, and a simple plug and play set up with minimal user programming

required.

With non line-of-site capabilities, these radios can easily penetrate indoors up to 1,500’ or through

10 building walls and supports industrial-grade temperature ranges. The system configuration can

include up to 12 access points – each on its own non-overlapping channel (up to 192 subscriber units

across a given site with 16 active clients per access point). These products are an ideal replacement

for modest data rate installations where 802.11 systems are under-performing or failing completely

due to insufficient range or excessive interference.

Features

Screen Captures:

Web Browser based

Management Tools

AW900iTR, AW900iTR-PAIR

Product Brief

www.avalanwireless.com

Corporate headquarters

:: (866) 533.6216

Technical support

:: (650) 384.0000

•1.5 Mbps Data Rate

•High RF output power provides maximum foliage and/or

wall penetration

- Indoor range, up to 10 building walls

- Line-of-sight range up to 40 miles with 15 dBi antenna

•128 bit AES encryption, FIPS 197 - NIST Certified

•Built-in spectrum analyzer

•Radio can be configured as an access point or client

- Install up to 16 clients per access point

- 12 Non-overlapping channels

•Does not require an FCC license to operate or install

Indoor point-to-multipoint

wireless Ethernet system

Application Example: