3 LED Module (30 modules/string)

OVM12F3x7 series

© TT electronics plc

Rev F 05/2023

Page 2

TT Electronics | OPTEK Technology

2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200

www.ttelectronics.com | sensors@ttelectronics.com

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Absolute Maximum Ratings (TA = 25 °C unless otherwise noted)

Storage Temperature Range

-40 ~ +80 °C

Operating Temperature Range

-30 ~ +50 °C

Input Voltage

15 V

Power Dissipation

1.5 W

LED Junction Temperature

125

oC

Electrostatic Discharge Classification (JEDEC-JESD22-A114F)

Class 1C

Electrical Specifications

Electrical Characteristics (TA = 25 °C unless otherwise noted)

SYMBOL

PARAMETER

MIN

TYP

MAX

UNITS

TEST CONDITIONS

Power Consumption

Red/Yellow/Green/Blue/White

- - -

0.5

0.3

- - -

W

VDC = 12 V

VDC

Input Voltage

- - -

12

- - -

V

Net Weight

- - -

16

- - -

g

Per module

λD

Dominant Wavelength

- - -

See

chart

2 Θ½

50% Power Angle

----

120

----

deg

VDC = 12 V

Notes:

1.

Lead Solder time less than 10 seconds at temperature extreme.

2.

No Heat sink is required if the string is operated at ambient temperature < 35 °C. For long term performance the drive voltage at 12 V is

recommended.

If an entire string is not required for the application, clip wires at mid-span:

Modules can be secured onto a mounting surface with two #6 screws. Modules are waterproof and can be used outdoors.

The installer is responsible for waterproofing the connection to the power source. The installer is also responsible for the

use of an exterior approved power source.