M68HC08 datasheet(41/172 Pages) FREESCALE

41 / 172 page

Arithmetic/Logic Unit (ALU)

MC68HC908JL3E Family Data Sheet, Rev. 3

Freescale Semiconductor

After the I bit is cleared, the highest-priority interrupt request is serviced first.

A return-from-interrupt (RTI) instruction pulls the CPU registers from the stack and restores the

interrupt mask from the stack. After any reset, the interrupt mask is set and can be cleared only by the

clear interrupt mask software instruction (CLI).

N — Negative flag

The CPU sets the negative flag when an arithmetic operation, logic operation, or data manipulation

produces a negative result, setting bit 7 of the result.

1 = Negative result

0 = Non-negative result

Z — Zero flag

The CPU sets the zero flag when an arithmetic operation, logic operation, or data manipulation

produces a result of $00.

1 = Zero result

0 = Non-zero result

C — Carry/Borrow Flag

The CPU sets the carry/borrow flag when an addition operation produces a carry out of bit 7 of the

accumulator or when a subtraction operation requires a borrow. Some instructions — such as bit test

and branch, shift, and rotate — also clear or set the carry/borrow flag.

1 = Carry out of bit 7

0 = No carry out of bit 7

4.4 Arithmetic/Logic Unit (ALU)

The ALU performs the arithmetic and logic operations defined by the instruction set.

Refer to the CPU08 Reference Manual (Motorola document order number CPU08RM/AD) for a

description of the instructions and addressing modes and more detail about the architecture of the CPU.

4.5 Low-Power Modes

The WAIT and STOP instructions put the MCU in low power-consumption standby modes.

4.5.1 Wait Mode

The WAIT instruction:

•

Clears the interrupt mask (I bit) in the condition code register, enabling interrupts. After exit from

wait mode by interrupt, the I bit remains clear. After exit by reset, the I bit is set.

•

Disables the CPU clock

4.5.2 Stop Mode

The STOP instruction:

•

Clears the interrupt mask (I bit) in the condition code register, enabling external interrupts. After

exit from stop mode by external interrupt, the I bit remains clear. After exit by reset, the I bit is set.

•

Disables the CPU clock

After exiting stop mode, the CPU clock begins running after the oscillator stabilization delay.

M68HC08 데이터시트(PDF) 41 Page - Freescale Semiconductor, Inc

M68HC08 데이터시트(HTML) 41 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL