EDS1019-002

Page 2 of 2

Note:NeutralContactisEarly

Make/LateBreak

Europa House, Airport Way, Luton, Beds, LU2 9NH Tel: 01582 692 440 / Fax: 01582 692 450 e-mail: sales@europacomponents.com

website: http://www.europacomponents.com

Terminal

Configuration

Enclosure Base

Switch Assembly

Screw Driver

Cover Screw

Knob

Mounting

Cover

* Detail B

*

Use screwdriver to pull rail - slide to

remove switch from Enclosure base.

Switch

Rail Slide

Knockout (o 16mm)

2 Places

Mounting

Details

Suitable for M4 Screw

Knockout M20 (4 Places)

Procedure to dismantle the cover:

n Ensure the switch is in the

OFF position

n Unscrew the cover screws & remove the cover

n For easy wiring the switch can be removed from the base & then clicked back into place once wiring is complete

n After wiring ensure the profile orientation of the actuating spindle & knob shaft are in the same position

n Replace the cover & take care not to overtighten the screws (recommended tightening torque 0.5 Nm)

n Do not install using power driven screwdrivers

Please Note: There is no need to remove the switch handle in order to remove the cover.

LB_Box_Size_1.qxp_Layout1 19/09/2014 15:21 Page2

Technical Data:

LB20, 25, 32, 403PSN / LB32, 403P / LB20,

25, 32, 40

4P AC-21 Enclosed Switch Disconnectors

(Boxed Isolators)