TL714C

HIGH-SPEED DIFFERENTIAL COMPARATOR

SLCS015A − DECEMBER 1988 − REVISED AUGUST 2003

2

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

schematic of inputs and outputs

VCC

IN

9.6 k

Ω

100

Ω

VCC

OUT

9.6 k

Ω

GND

EACH INPUT

OUTPUT

50

Ω

All resistor values shown are nominal.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage, VCC (see Note 1)

7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Differential input voltage, VID (see Note 2)

±5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI

VCC to GND

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Low-level output current, IOL

40 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Notes 3 and 4): D package

97

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

P package

85

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating virtual junction temperature, TJ

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential voltage, are with respect to the network ground.

2. Differential voltage values are at IN+ with respect to IN−.

3. Maximum power dissipation is a function of TJ(max),

θ

JA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/

θ

JA. Operating at the absolute maximum TJ of 150°C can affect reliability.

4. The package thermal impedance is calculated in accordance with JESD 51-7.

recommended operating conditions

MIN

MAX

UNIT

VCC

Supply voltage

4.75

5.25

V

VIC

Common-mode input voltage

1.4

to

VCC−1.4

V

IOH

High-level output current

−1

mA

IOL

Low-level output current

16

mA

TA

Operating free-air temperature

0

70

°C