Serial Bus Traces

Pull-Up Resistors

Supply Bypass

Capacitor

Via to Power or Ground Plane

Via to Internal Layer

Supply Voltage

SCL

GND

ADD1

V+

SDA

Ground Plane for

Thermal Coupling

to Heat Source

Heat Source

ADD0

TMP100, TMP101

www.ti.com

SBOS231I – JANUARY 2002 – REVISED NOVEMBER 2015

9 Power Supply Recommendations

The TMP100 and TMP101 devices operate with power supply in the range of 2.7 V to 5.5 V. A power-supply

bypass capacitor is required for stability; place this capacitor as close as possible to the supply and ground pins

of the device. A typical value for this supply bypass capacitor is 0.01

μF. Applications with noisy or high-

impedance power supplies can require additional decoupling capacitors to reject power-supply noise.

10 Layout

10.1 Layout Guidelines

Place the power-supply bypass capacitor as close as possible to the supply and ground pins. The recommended

value of this bypass capacitor is 0.01

μF. Additional decoupling capacitance can be added to compensate for

noisy or high-impedance power supplies. Pull up the open-drain output pins SDA , SCL, and ALERT (TMP101)

through 5-k

Ω pullup resistors.

10.2 Layout Examples

Figure 15. TMP100 Layout Example

Copyright © 2002–2015, Texas Instruments Incorporated

Submit Documentation Feedback

21

Product Folder Links: TMP100 TMP101