ADXL343 + ADT7410 Sensor FeatherWing

PRODUCT ID: 4147

 

Upgrade any Feather board with motion and precision temperature sensing, with

this all-in-one sensing FeatherWing. It sports two fantastic sensors from Analog

Devices: an ADXL343 triple-axis accelerometer and an ADT7410 precision

temperature sensor.

Both sensors are connected over the shared I2C bus, so you can use it with any

and all Feathers! We also break out the interrupt pins and address-selection

jumpers in case you want multiple Feathers or have I2C address conflicts. We've

got both Arduino (C/C++) and CircuitPython libraries available so you can use it

with any Feather board and get data readings in under 5 minutes.

The Analog Devices ADXL343 has three axes of measurements, X Y Z. You can

set the sensitivity level to either +-2g, +-4g, +-8g or +-16g. The lower range

gives more resolution for slow movements, the higher range is good for high

speed tracking. The ADXL343 is the latest and greatest from Analog Devices,

known for their exceptional quality MEMS devices.