LM1972

SNAS094D – APRIL 1995 – REVISED MARCH 2013

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2) (3)

Supply Voltage (VDD–VSS)

15V

Voltage at Any Pin

VSS − 0.2V to VDD + 0.2V

Power Dissipation (4)

150 mW

ESD SusceptabiIity (5)

2000V

Junction Temperature

150°C

Soldering Information

DW Package (10 sec.)

+260°C

Storage Temperature

−65°C to +150°C

(1)

All voltages are measured with respect to GND pins (1, 3, 5, 6, 14, 16, 19), unless otherwise specified.

(2)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional. Electrical Characteristics state DC and AC electrical specifications under particular test conditions. This

assumes that the device is within the Operating Ratings. The typical value is a good indication of device performance.

(3)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and

specifications.

(4)

The maximum power dissipation must be derated at elevated temperatures and is dictated by TJMAX, θJA, and the ambient temperature

TA. The maximum allowable power dissipation is PD = (TJMAX − TA)/θJA or the number given in the Absolute Maximum Ratings,

whichever is lower. For the LM1972, TJMAX = +150°C, and the typical junction-to-ambient thermal resistance, when board mounted, is

65°C/W.

(5)

Human body model, 100 pF discharged through a 1.5 k

Ω resistor.

Operating Ratings

(1) (2)

TMIN

TA

TMAX

Temperature Range

TMIN ≤TA ≤TMAX

0°C

≤TA

≤ +70°C

Supply Voltage (VDD − VSS)

4.5V to 12V

(1)

All voltages are measured with respect to GND pins (1, 3, 5, 6, 14, 16, 19), unless otherwise specified.

(2)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional. Electrical Characteristics state DC and AC electrical specifications under particular test conditions. This

assumes that the device is within the Operating Ratings. The typical value is a good indication of device performance.

2

Submit Documentation Feedback

Copyright © 1995–2013, Texas Instruments Incorporated

Product Folder Links: LM1972