7

7 - 211

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Evaluation PCB

The circuit board used in the final application should

use RF circuit design techniques. Signal lines should

have 50 ohm impedance while the package ground

leads should be connected directly to the ground

plane similar to that shown. A sufficient number of

VIA holes should be used to connect the top and

bottom ground planes. The evaluation circuit board

shown is available from Hittite upon request.

Item

Description

J1 - J4

PCB Mount SMA RF Connector

C1

10 pF Capacitor, 0603 Pkg.

C2

.01 μF Capacitor, 0603 Pkg.

L1

1.8 nH Inductor, 0805 Pkg.

U1

HMC333 / HMC333E Mixer

103927 Evaluation Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

GaAs MMIC MIXER w/ INTEGRATED

LO AMPLIFIER, 3.0 - 3.8 GHz

v01.0705