2

dc1307bf

DEMO MANUAL DC1307B

qUick stArt proceDUre

Demonstration circuit 1307B is an easy way to evaluate

the performance of the LTM8027. Refer to Figure 1 for

proper measurement equipment setup and follow the

procedure below:

1. Place JP1 on the ON position.

2. With power off, connect the input power supply to VIN

and GND. Preset the power supply within the input

voltage range.

3. Connect the load and preset to 0A.

4. Turn on the power at the input.

5. Check for the proper output voltage.

6. Once the proper output voltages are established, adjust

the loads within the operating range and observe the

output voltage regulation, ripple voltage, efficiency and

other parameters.

Figure 1. Proper Measurement Equipment Setup

+ –

+

–

+

–

LOAD

+

–

+

–

+

–

dc1307b F02