GND

SAMPLING

CAPACITOR

SW1

-

+

CONTROL

LOGIC

CHARGE

REDISTRIBUTION

DAC

SW2

VIN

VA

2

GND

SAMPLING

CAPACITOR

SW1

-

+

CONTROL

LOGIC

CHARGE

REDISTRIBUTION

DAC

SW2

VIN

VA

2

ADC081S051

www.ti.com

SNAS309F – APRIL 2005 – REVISED JANUARY 2014

APPLICATIONS INFORMATION

ADC081S051 OPERATION

The ADC081S051 is a successive-approximation analog-to-digital converter designed around a charge-

redistribution digital-to-analog converter core. Simplified schematics of the ADC081S051 in both track and hold

modes are shown in Figure 18 and Figure 19, respectively. In Figure 18, the device is in track mode: switch SW1

connects the sampling capacitor to the input and SW2 balances the comparator inputs. The device is in this state

until CS is brought low, at which point the device moves to hold mode.

Figure 19 shows the device in hold mode: switch SW1 connects the sampling capacitor to ground, maintaining

the sampled voltage, and switch SW2 unbalances the comparator. The control logic then instructs the charge-

redistribution DAC to add or subtract fixed amounts of charge from the sampling capacitor until the comparator is

balanced. When the comparator is balanced, the digital word supplied to the DAC is the digital representation of

the analog input voltage. The device moves from hold mode to track mode on the 13th rising edge of SCLK.

Figure 18. ADC081S051 in Track Mode

Figure 19. ADC081S051 in Hold Mode

Copyright © 2005–2014, Texas Instruments Incorporated

Submit Documentation Feedback

13

Product Folder Links: ADC081S051