6

DM2 Series

●miniSDTM Card Connectors

Preheating

Time (Seconds)

90 sec. to 120 sec.

150ç

200ç

230ç min

Peak:250ç MAX

Soldering

50 sec.

250

(ç)

200

150

100

50

■Recommended temperature profile

■Precautions and recommendations

1. Washing recommendations

Do not wash the entire connector. Intrusion of washing fluids in the connector may affect the operation of the

ejection mechanism, card insertion or electrical performance.

If required, wash only soldered joints, exercising caution not to allow intrusion of washing solution inside the

connector.

2. Use correct card

The connector is designed for miniSDTM card.

Although it will withstand reverse card insertion attempts without damage, care should be taken NOT to subject it

to extreme insertion forces, angle insertion or card twisting.

3. Do not apply excessive external force

Application of excessive external force during card insertion or removal may cause malfunction or damage to the

connector or card.

<Recommended conditions>

Reflow system

: IR/Hot air

Environment

: Room air

Solder composition

: Paste, 96.5%Sn / 3.0%Ag / 0.5%Cu

(M705-221CM5-42-10.5 manufactured

by Senju Metal Industry Co., Ltd.)

Test board

: Glass epoxy 60mm x 100mm x 1mm

thick

Metal mask thickness

: 0.12 mm

This temperature profile is based on the above conditions.

In individual applications the actual temperature may vary,

depending on solder paste type, volume/thickness and board

size/thickness. Consult your solder paste and equipment

manufacturer for specific recommendations.

Embossed carrier tape

Top tape cover

End section

Mounting section

Lead section (400mm min.)

Blank section (160mm min.)

Blank section (100mm min.)

■Packaging Specifications

● Embossed carrier tape dimensions (800 pieces per reel)

32.4+20

( 3.75 )

( 2.65 )

Unreeling direction

2±0.1

32±0.1

P=4±0.1

● Reel dimensions

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.