e) Step by step

1. Adjust voltage of Regulated Power to 0-2.085V, and then power on.

2. Install Arduino MCP3424 library, see Install Arduino MCP3424 library

3. Open Arduino IDE

4. Upload code to UNO

/* MCP 3424 version 1.2 example sketch OneShotConversion

Written by B@tto

Contact : batto@hotmail.fr

In this example, one conversion per second is performed on channel 1 and 16

bits resolution.

A new conversion has to be initiated by the user

*/

#include <Wire.h>

#include <MCP3424.h>

MCP3424 MCP(0x68);

// Decaration of MCP3424 with Address of I2C