Example with DPS368 Kit2Go

Connect the DPS368 Kit2Go to your Computer via

Micro-USB

After having installed the DPS368 library and the

XMC Family boards, navigate to File=>Examples

Pick the example you like (depending on your I²C/SPI

configuration) and click on the upload Button (make

sure Board is XMC1100 XMC2Go)

Select the related COM port from Tools=>Port and

open the serial monitor with the set baud rate (see

sketch/code with Serial.begin(<baud rate>);)

12

11/2/2022

Copyright © Infineon Technologies AG 2022. All rights reserved.

Serial

Monitor

Follow the same steps for the DPS310 Kit2Go