4

DRV8874

SLVSF66A – AUGUST 2019 – REVISED DECEMBER 2019

www.ti.com

Submit Documentation Feedback

Copyright © 2019, Texas Instruments Incorporated

(1)

Stresses beyond those listed under Absolute Maximum Rating may cause permanent damage to the device. These are stress ratings

only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended

Operating Condition. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

6 Specifications

6.1 Absolute Maximum Ratings

over operating temperature range (unless otherwise noted)

(1)

MIN

MAX

UNIT

Power supply pin voltage

VM

–0.3

40

V

Voltage difference between ground pins

GND, PGND

–0.3

0.3

V

Charge pump pin voltage

CPH, VCP

VVM – 0.3

VVM + 7

V

Charge pump low-side pin voltage

CPL

–0.3

VVM + 0.3

V

Logic pin voltage

EN/IN1, IMODE, nSLEEP, PH/IN2,

PMODE

–0.3

5.75

V

Open-drain output pin voltage

nFAULT

–0.3

5.75

V

Output pin voltage

OUT1, OUT2

–0.9

VVM + 0.9

V

Output pin current

OUT1, OUT2

Internally

Limited

Internally

Limited

A

Proportional current output pin voltage

IPROPI

–0.3

5.75

V

–0.3

VVM + 0.3

V

Reference input pin voltage

VREF

–0.3

5.75

V

Ambient temperature, TA

–40

125

°C

Junction temperature, TJ

–40

150

°C

Storage temperature, Tstg

–65

150

°C

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Pins listed as ± 2000

V may actually have higher performance.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Pins listed as ± 500

V may actually have higher performance.

6.2 ESD Ratings

VALUE

UNIT

V(ESD)

Electrostatic

discharge

Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

Charged device model (CDM), per JEDEC specification JESD22-C101(2)

±500

(1)

Power dissipation and thermal limits must be observed

6.3 Recommended Operating Conditions

over operating temperature range (unless otherwise noted)

MIN

NOM

MAX

UNIT

VVM

Power supply voltage

VM

4.5

37

V

VIN

Logic input voltage

EN/IN1, MODE, nSLEEP, PH/IN2

0

5.5

V

fPWM

PWM frequency

EN/IN1, PH/IN2

0

100

kHz

VOD

Open drain pullup voltage

nFAULT

0

5.5

V

IOD

Open drain output current

nFAULT

0

5

mA

IOUT

(1)

Peak output current

OUT1, OUT2

0

6

A

IIPROPI

Current sense output current

IPROPI

0

3

mA

VVREF

Current limit reference voltage

VREF

0

3.6

V

TA

Operating ambient temperature

–40

125

°C

TJ

Operating junction temperature

–40

150

°C