ISO7640FM, ISO7641FM

www.ti.com

SLLSE89G – SEPTEMBER 2011 – REVISED JANUARY 2015

6.17 Switching Characteristics: VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%

VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10% (over recommended operating conditions unless otherwise noted)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

tPLH, tPHL

Propagation delay time

4

7.5

12.5

See Figure 9

PWD(1)

Pulse width distortion |tPHL – tPLH|

2

Same-direction Channels

2.5

ns

tsk(o)

(2)

Channel-to-channel output skew time

Opposite-direction Channels

3.5

tsk(pp)

(3)

Part-to-part skew time

6

tr

Output signal rise time

1.7

See Figure 9

ns

tf

Output signal fall time

1.1

Disable Propagation Delay, high-to-high impedance

tPHZ

5.5

17

output

Disable Propagation Delay, low-to-high impedance

tPLZ

5.5

17

output

See Figure 10

ns

Enable Propagation Delay, high impedance-to-high

tPZH

4.5

17

output

Enable Propagation Delay, high impedance-to-low

tPZL

4.5

17

output

Fail-safe output delay time from input data or power

tfs

See Figure 11

9.5

μs

loss

(1)

Also known as Pulse Skew.

(2)

tsk(o) is the skew between outputs of a single device with all driving inputs connected together and the outputs switching in the same

direction while driving identical loads.

(3)

tsk(pp) is the magnitude of the difference in propagation delay times between any terminals of different devices switching in the same

direction while operating at identical supply voltages, temperature, input signals and loads.

6.18 Switching Characteristics: VCC1 and VCC2 at 3.3 V ±10%

VCC1 and VCC2 at 3.3 V ±10% (over recommended operating conditions unless otherwise noted)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

tPLH, tPHL

Propagation delay time

4

8.5

14

See Figure 9

PWD(1)

Pulse width distortion |tPHL – tPLH|

2

Same-direction Channels

3

ns

tsk(o)

(2)

Channel-to-channel output skew time

Opposite-direction Channels

4

tsk(pp)

(3)

Part-to-part skew time

6.5

tr

Output signal rise time

2

See Figure 9

ns

tf

Output signal fall time

1.3

Disable Propagation Delay, high-to-high

tPHZ

6.5

17

impedance output

Disable Propagation Delay, low-to-high impedance

tPLZ

6.5

17

output

See Figure 10

ns

Enable Propagation Delay, high impedance-to-high

tPZH

5.5

17

output

Enable Propagation Delay, high impedance-to-low

tPZL

5.5

17

output

Fail-safe output delay time from input data or

tfs

See Figure 11

9.2

μs

power loss

(1)

Also known as Pulse Skew.

(2)

tsk(o) is the skew between outputs of a single device with all driving inputs connected together and the outputs switching in the same

direction while driving identical loads.

(3)

tsk(pp) is the magnitude of the difference in propagation delay times between any terminals of different devices switching in the same

direction while operating at identical supply voltages, temperature, input signals and loads.

Copyright © 2011–2015, Texas Instruments Incorporated

Submit Documentation Feedback

15

Product Folder Links: ISO7640FM ISO7641FM