LM76005 datasheet(28/51 Pages) TI2

부품명	LM76005

상세설명	LM76005 3.5-V to 60-V, 5-A Synchronous Step-Down Converter

PDF	51 Pages

Scroll/Zoom	100%

제조업체	TI2 [Texas Instruments]

홈페이지	https://www.ti.com

Logo

28 / 51 page

Equation 26 yields a value of 315 kΩ. The resulting falling UVLO threshold, can be calculated by Equation 27,

where EN falling threshold (VENL) is 0.99 V (typical).

VIN-UVLO-FALLING = VENL × (RENB + RENT) / RENB

(27)

8.2.2.13 PGOOD

A typical pullup resistor value is 10 kΩ to 100 kΩ from the PGOOD pin to a voltage no higher than 18 V. If it is

desired to pull up the PGOOD pin to a voltage higher than 18 V, a resistor can be added from the PGOOD pin to

ground to divide the voltage detected by the PGOOD pin to a value no higher than 18 V.

8.2.2.14 Synchronization

The LM76005 switching action can synchronize to an external clock from 200 kHz to 500 kHz. TI recommends

connecting an external clock to the SYNC pin with a 50-Ω to 100-Ω termination resistor. Ground the SYNC pin if

not used.

LM76005

SNVSBK5A – FEBRUARY 2020 – REVISED JULY 2020

www.ti.com

Submit Document Feedback

Product Folder Links: LM76005

LM76005 데이터시트(PDF) 28 Page - Texas Instruments