SPC560D30X datasheet(63/82 Pages) STMICROELECTRONICS

63 / 82 page

DS6494 Rev 8

63/82

SPC560D30x, SPC560D40x

Electrical characteristics

4.18

On-chip peripherals

4.18.1

Current consumption

2. Analog and digital VSS must be common (to be tied together externally).

3. VAINx may exceed VSS_ADC and VDD_ADC limits, remaining on absolute maximum ratings, but the results of the conversion

will be clamped respectively to 0x000 or 0xFFF.

4. Duty cycle is ensured by using system clock without prescaling. When ADCLKSEL = 0, the duty cycle is ensured by internal

divider by 2.

5. During the sampling time the input capacitance CS can be charged/discharged by the external source. The internal

resistance of the analog source must allow the capacitance to reach its final voltage level within tS. After the end of the

sampling time tS, changes of the analog input voltage have no effect on the conversion result. Values for the sample clock

tS depend on programming.

6. This parameter does not include the sampling time tS, but only the time for determining the digital result and the time to load

the result’s register with the conversion result.

Table 43. On-chip peripherals current consumption

Symbol

Parameter

Conditions

Typical value(1) Unit

IDD_BV(CAN)

CC T

CAN (FlexCAN)

supply current on

VDD_BV

500 Kbyte/s Total (static + dynamic)

consumption:

– FlexCAN in loop-back

mode

– XTAL at 8 MHz used as

CAN engine clock source

– Message sending period

is 580 µs

8×fperiph + 85

µA

125 Kbyte/s

8 × fperiph + 27

µA

IDD_BV(eMIOS)

CC T

eMIOS supply

current on VDD_BV

Static consumption:

– eMIOS channel OFF

– Global prescaler enabled

29 × fperiph

µA

Dynamic consumption:

– It does not change varying the

frequency (0.003 mA)

3µA

IDD_BV(SCI)

CC T

SCI (LINFlex) supply

current on VDD_BV

Total (static + dynamic) consumption:

–LIN mode

– Baudrate: 20 Kbyte/s

5×fperiph + 31

µA

IDD_BV(SPI)

CC T

SPI (DSPI) supply

current on VDD_BV

Ballast static consumption (only clocked)

µA

Ballast dynamic consumption

(continuous communication):

– Baudrate: 2 Mbit/s

– Transmission every 8 µs

– Frame: 16-bits

16 × fperiph

µA

IDD_BV(ADC)

CC T

ADC supply current

on VDD_BV

VDD = 5.5 V

Ballast static consumption

(no conversion)

41 × fperiph

µA

Ballast dynamic

consumption (continuous

conversion)(2)

5×fperiph

µA

SPC560D30X 데이터시트(PDF) 63 Page - STMicroelectronics

SPC560D30X 데이터시트(HTML) 63 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

데이터시트 다운로드

링크 URL