SN54AHCT240 datasheet(9/43 Pages) TI2

9 / 43 page

Parameter Measurement Information

Unless otherwise noted, all input pulses are supplied by generators having the following characteristics:

• PRR ≤ 1 MHz

• ZO = 50 Ω

• tr ≤ 3 ns

• tf ≤ 3 ns

Note

All parameters and waveforms are not applicable to all devices.

(1)

From Output

Under Test

Test

Point

CL includes probe and jig capacitance.

The outputs are measured one at a time, with one transition per measurement.

Figure 6-1. Load Circuit For Totem-Pole Outputs

From Output

Under Test

(1)

RL = 1 kŸ

Open

VCC

GND

CL includes probe and jig capacitance.

The outputs are measured one at a time, with one transition per measurement.

Figure 6-2. Load Circuit For Tri-State And Open-Drain Outputs

Table 6-1. Loading Conditions For Parameter

TEST

tPLH (1), tPHL (1)

Open

tPLZ (3), tPZL (2)

VCC

tPHZ (3), tPZH (2)

GND

Open drain

VCC

(1)

tPLH and tPHL are the same as tpd.

(2)

tPZL and tPZH are the same as ten.

(3)

tPLZ and tPHZ are the same as tdis.

1.5 V

3 V

0 V

Input

1.5 V

Figure 6-3. Voltage Waveforms Pulse Durations

www.ti.com

SN54AHCT240, SN74AHCT240

SCLS252P – OCTOBER 1995 – REVISED JANUARY 2025

Submit Document Feedback

Product Folder Links: SN54AHCT240 SN74AHCT240

SN54AHCT240 데이터시트(PDF) 9 Page - Texas Instruments

SN54AHCT240 데이터시트(HTML) 9 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

데이터시트 다운로드

링크 URL