TL072CPWR.A datasheet(30/89 Pages) TI2

30 / 89 page

8 Application and Implementation

Note

Information in the following applications sections is not part of the TI component specification,

and TI does not warrant its accuracy or completeness. TI’s customers are responsible for

determining suitability of components for their purposes, as well as validating and testing their design

implementation to confirm system functionality.

8.1 Application Information

A typical application for an operational amplifier is an inverting amplifier. This amplifier takes a positive voltage

on the input, and makes the voltage a negative voltage. In the same manner, the amplifier makes negative

voltages positive.

8.2 Typical Applications

8.2.1 Inverting Amplifier

Vsup+

VOUT

VIN

Vsup-

Figure 8-1. Inverting Amplifier

8.2.1.1 Design Requirements

The supply voltage must be selected so the supply voltage is larger than the input voltage range and output

range. For instance, this application scales a signal of ±0.5 V to ±1.8 V. Setting the supply at ±12 V is sufficient

to accommodate this application.

8.2.1.2 Detailed Design Procedure

Determine the gain required by the inverting amplifier:

AV=VOUTVIN

(1)

AV= 1.8−0.5 = −3.6

(2)

After the desired gain is determined, select a value for RI or RF. Selecting a value in the kilohm range is

desirable because the amplifier circuit uses currents in the milliamp range. This example uses 10 kΩ for RI,

which means 36 kΩ is used for RF. The gain is determined by Equation 3.

AV=−RFRI

(3)

TL071, TL071A, TL071B, TL071H

TL072, TL072A, TL072B, TL072H, TL072M

TL074, TL074A, TL074B, TL074H, TL074M

SLOS080W – SEPTEMBER 1978 – REVISED JULY 2025

www.ti.com

Submit Document Feedback

Product Folder Links: TL071 TL071A TL071B TL071H TL072 TL072A TL072B TL072H TL072M TL074 TL074A TL074B TL074H TL074M

TL072CPWR.A 데이터시트(PDF) 30 Page - Texas Instruments