| 전자부품 데이터시트 검색엔진 |
|
MP8796B 데이터시트(PDF) 34 Page - Monolithic Power Systems |
|
|
|||||||||||||||||||||||||||||
MP8796B 데이터시트(HTML) 34 Page - Monolithic Power Systems |
|
34 / 52 page ![]() MP8796B – 16V, 30A, SYNCHRONOUS STEP-DOWN CONVERTER WITH PMBUS MP8796B Rev. 1.0 www.MonolithicPower.com 34 1/19/2020 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2020 MPS. All Rights Reserved. The following registers can be stored using STORE_USER_ALL. OPERATION (01h) TOFF_DELAY (64h) ON_OFF_CONFIG (02h) MFR_REVISION (9Bh) WRITE_PROTECT (10h) MFR_4_DIGIT (9Dh) VOUT_COMMAND (21h) MFR_CTRL_COMP (D0h) VOUT_MAX (24h) MFR_CTRL_VOUT (D1h) VOUT_MARGIN_HIGH (25h) MFR_CTRL_OPS (D2h) VOUT_MARGIN_LOW (26h) MFR_ADDR_PMBUS (D3h) VOUT_SCALE_LOOP (29h) MFR_VOUT_OVP_FAULT_LIMIT (D4h) VOUT_MIN (2Bh) MFR_OVP_NOCP_SET (D5h) VIN_ON (35h) MFR_OT_OC_SET (D6h) VIN_OFF (36h) MFR_OC_PHASE_LIMIT (D7h) OT_FAULT_LIMIT (4Fh) MFR_HICCUP_ITV_SET (D8h) OT_WARN_LIMIT (51h) MFR_UVP_PGOOD_ON_LIMIT (D9h) VIN_OV_FAULT_LIMIT (55h) MFR_VOUT_STEP (DAh) VIN_OV_WARN_LIMIT (57h) MFR_LOW_POWER (E5h) VIN_UV_WARN_LIMIT (58h) MFR_CTRL (EAh) TON_DELAY (60h) MFR_LOW_POWER (E5h) TON_RISE (61h) MFR_CTRL (EAh) RESTORE_USER_ALL (16h) The RESTORE_USER_ALL command instructs the MP8796B to copy the entire contents of the MTP values to the matching locations in the registers. The values in the registers are overwritten by the value retrieved from the MTP. Any items in the MTPs that do not have matching locations in the operating memory are ignored. The RESTORE_USER_ALL command can be used while the MP8796B is operating. However, this is not recommended as the MP8796B may be unresponsive during the operation with unpredictable results. This command is write-only. CAPABILITY (19h) The CAPABILITY command returns information about the PMBus functions supported by the MP8796B. This command is read with the PMBus read byte protocol. Command CAPABILITY Format Unsigned binary Bit 7 6 5 4 3 2 1 0 Access R R R R R R R R Function PEC Max bus speed Alert X X X X Default Value 1 0 1 1 0 0 0 0 PEC supported, max speed 1MHz, supports PMBus alert and ARA. Bit[6:5] Value Meaning 0 0 Maximum supported bus speed is 100kHz. 0 1 Maximum supported bus speed is 1MHz. 1 0 Maximum supported bus speed is 400kHz. 1 1 Reserved. The default value of 19h is 0xB0. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |