Page 1 of 4

www.siliconsupplies.com

Linear Voltage Regulator – 7809

Positive Fixed 9V Voltage Regulator in bare die form



±5% VOUT tolerance over entire temperature range



Greater than 1A output current capability



Internal thermal overload protection



Internal short-circuit current limit



Output capacitor not essential for stability



Full Military temperature range



Negative voltage complement is 7909

Rev

2.0

18/07/25

Features:

Ordering Information

The following part suffixes apply:



No suffix - MIL-STD-883 /2010B Visual Inspection



“H” - MIL-STD-883 /2010B Visual Inspection

+ MIL-PRF-38534 Class H LAT



“K” - MIL-STD-883 /2010A Visual Inspection (Space)

+ MIL-PRF-38534 Class K LAT

LAT = Lot Acceptance Test.

For further information on LAT process flows see below.

www.siliconsupplies.com\quality\bare-die-lot-qualification

Supply Formats:

Mechanical Specification



Default – Die in Waffle Pack (100 per tray capacity)



Sawn Wafer on Tape – On request



Unsawn Wafer – On request



Tape & Reel – On request



In Metal or Ceramic package – On request

The 7809 9V fixed 3-terminal positive voltage regulator

delivers up to 1.5A of output current with adequate

heat-sinking. The device is equipped with internal

limiting, safe-area compensation + thermal shutdown

features for overload immunity. The 7809 can be used

with external components to obtain adjustable voltages

or currents & can also be used as the power-pass

element in precision high-current voltage regulators.

No external components are needed other than to

enhance performance or increase design flexibility.

Description

Die Dimensions in µm (mils)

1860 (73)

Die Size (Unsawn)

1860 x 1580

73 x 62

µm

mils

Minimum Bond Pad Size

165 x 165

6.49 x 6.49

µm

mils

Die Thickness

280 (±20)

11.02 (±0.79)

µm

mils

Top Metal Composition

Al-Si-Cu

Back Metal Composition

Ti/Ni/Ag