| 전자부품 데이터시트 검색엔진 |
|
TUSB1210 데이터시트(PDF) 1 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TUSB1210 데이터시트(HTML) 1 Page - Texas Instruments |
|
1 / 72 page ![]() TUSB1210 Stand-Alone USB Transceiver Chip Silicon 1 Features • USB2.0 PHY transceiver chip, designed to interface with a USB controller through a ULPI interface, fully compliant with: – Universal serial bus specification Rev. 2.0 – On-the-go supplement to the USB 2.0 specification Rev. 1.3 – UTMI+ low pin interface (ULPI) specification Rev. 1.1 – ULPI 12-pin SDR interface • DP/DM line external component compensation (patent #US7965100 B1) • Interfaces to host, peripheral and OTG device cores; optimized for portable devices or system ASICs with built-in USB OTG device core • Complete USB OTG physical front-end that supports host negotiation protocol (HNP) and session request protocol (SRP) • VBUS overvoltage protection circuitry protects VBUS pin in range –2 V to 20 V • Internal 5-V short-circuit protection of DP, DM, and ID pins for cable shorting to VBUS pin • ULPI interface: – I/O interface (1.8 V) optimized for nonterminated 50 Ω line impedance – ULPI CLOCK pin (60 MHz) supports input and output clock configurations – Fully programmable ULPI-compliant register set • Full industrial grade operating temperature range from –40°C to 85°C • Available in a 32-pin quad flat no lead [QFN (RHB)] package 2 Applications • Mobile phones • Portable computers • Tablet devices • Video game consoles • Desktop computers • Portable music players 3 Description The TUSB1210 is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps, and low-speed 1.5 Mbps), and is compliant to both host and peripheral modes. The device additionally supports a UART mode and legacy ULPI serial modes. TUSB1210 also supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including HNP and SRP. The DP/DM external component compensation in the transmitter compensates for variations in the series impendence in order to match with the data line impedance and the receiver input impedance, to limit data reflections and thereby improve eye diagrams. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) TUSB1210 VQFN (32) 5.00 mm × 5.00 mm (1) For all available packages, see the orderable addendum at the end of the datasheet. TUSB1210 (PHY) USB 2.0 LINK ULPI Interface USB 2.0 HOST, OTG, or Device Diagram TUSB1210 SLLSE09J – NOVEMBER 2009 – REVISED JULY 2021 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. |
유사한 부품 번호 - TUSB1210 |
|
유사한 설명 - TUSB1210 |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |