DM505 datasheet(38/295 Pages) TI2

38 / 295 page

Terminal Configuration and Functions

Submit Documentation Feedback

DM505

SPRS976E – NOVEMBER 2016 – REVISED MAY 2018

www.ti.com

Many signals are available on multiple pins, according to the software configuration of the pin multiplexing options.

1. SIGNAL NAME: The name of the signal passing through the pin.

NOTE

The subsystem multiplexing signals are not described in Table 4-1 and Table 4-28.

2. DESCRIPTION: Description of the signal

3. TYPE: Signal direction and type:

–

I = Input

–

O = Output

–

IO = Input or output

–

D = Open Drain

–

DS = Differential

–

A = Analog

–

PWR = Power

–

GND = Ground

4. BALL: Associated ball(s) bottom

NOTE

For more information, see the Control Module / Control Module Register Manual section of the Device TRM.

4.3.1

VIP

NOTE

For more information, see the Video Input Port (VIP) section of the Device TRM.

CAUTION

The IO timings provided in Section 5.9, Timing Requirements and Switching Characteristics are only valid for VIN1 and

VIN2 if signals within a single IOSET are used. The IOSETs are defined in Table 5-29 and Table 5-30.

Table 4-2. VIP Signal Descriptions

SIGNAL NAME

DESCRIPTION

TYPE

BALL

Video Input 1

DM505 데이터시트(PDF) 38 Page - Texas Instruments

DM505 데이터시트(HTML) 38 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL