| 전자부품 데이터시트 검색엔진 |
|
32D 데이터시트(PDF) 5 Page - Huizhou Songlong Lishang Electronics Co., LTD |
|
|
|||||||||||||||||||||||||||||
32D 데이터시트(HTML) 5 Page - Huizhou Songlong Lishang Electronics Co., LTD |
|
5 / 6 page ![]() 惠州市嵩隆力上电子 VDR Varistor SONGLONG LISHANG 32D SERIES Reliability Test Mechanical Ratings Test Parameter Test Condition / Description Performance Requirements Terminal Pull Strength After gradually applying the load specified below and keeping the unit fixed for ten seconds, the terminal shall be visually examined for any damage. Diameter Loading No visible damage 0.6mm 1.0 Kg 0.8mm 1.0 Kg 1.0mm 2.0 Kg Terminal Bending Strength The unit shall be secured with its terminal kept vertical and the weight specified below be applied in the axial direction. The terminal shall gradually be bent by 90° in one direction, then 90° in the opposite direction, and again back to the original position. The damage of the terminal shall be visually examined. Diameter Loading No visible damage 0.6mm 0.5 Kg 0.8mm 0.5 Kg 1.0mm 1.0 Kg Vibration The Specimen shall be vibrated by its lead wires with a total amplitude of 1.5㎜ and a varying frequency of 10~55~10HZ(each minutes) for a period of 2 hours respectively in each X,Yand Z directions. No visible damage △ VB/VB%≦±5% Soldering- solderability After dipping the terminal to depth of approximately 3㎜ from the specimen in a soldering bath of 260℃ for 10±1(D5: 5±1) seconds. Thereafter the terminal shall be visually examined. Terminations shall be uniformly tinned Soldering- Resistance to Solder Heat After preheating the specimen, the specimen shall be completely immersed into a soldering bath having a temperature of 260±5℃ for 10±1 (D5: 5±1) seconds or iron of 400±5℃ for 3±0.5 seconds. There after the change of Vb and mechanical damage shall be examined. No visible damage △ VB/VB%≦±5% ENVIRONMENTAL RATINGS Dry Heat Loading The specimen shall be applied continuously the maximum allowable voltage at the specified conditions for specified period and then stored at room temperature and normal humidity over 2 hours. Thereafter, the change of Vb and mechanical damage shall be examined. Ambient temp:125±2℃ ; Period:1000±24hours. △ VB/VB%≦±10% High Temperature Storage In a drying oven without load. Ambient temp:125±2℃ ; period:1000±24hours △ VB/VB%≦±5% Damp Heat Loading The specimen shall be applied continuously the maximum allowable voltage at the specified conditions for specified period and then stored at room temperature and normal humidity over 2 hours. Thereafter, the change of Vb and mechanical damage shall be examined. Ambient condition:40±2℃ , 90 to 95%R.H. ; period:1000±24 hours △ VB/VB%≦±10% Temperature Cycle Condition the specimen to each temperature form step 1 to step 4 in this order for the period shown in the table of specifications. The change of Vb and mechanical damage shall be examined after 2 hours. Step TempoC Period No visible damage △ VB/VB%≦±10% 1 -40+3oC 30 min. 2 Room Temp 15 min. 3 85+2oC 30 min. 4 Room Temp 15 min. Surge Lifetime Rating The change of Vb shall be measured after the impulse listed below is applied 10,000 times continuously with the interval of ten seconds at room temperature. No visible damage △ VB/VB%≦±10% Voltage Proof Voltage:2500VAC Leakage Current≦0.5mA Time:60 Seconds No Breakdown Page-4 www.vdrsas.com |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |