SW6008

5V/3.1A Type-C Solution Power Bank

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD.

May, 2022 - DS065_v1.3

10

9.4. Small Current Charge Mode

The SW6008 supports small current charge mode. This mode is set by register in I2C mode, and set

by pin in segment/led mode.

In small current charge mode, SW6008 can charge small current device such as bluetooth headset.

When enter into small current charge mode, light load detect will be disabled for two hours, and double

short key will also quit this mode. Besides, fuel gauge display will also change to indicate it is in small

current charge mode. Small current charge mode is set when LED2/SDA pin connects a 100KΩ

resister to ground.

9.5. Type C Interface

The SW6008 integrates Type-C logic controller include try.SRC role. When SOURCE is attached,

charger will automatically turn on to charge battery. When SOURCE is detached, charger will

automatically turn off. When SINK is attached, boost will automatically turn on to supply device.

When SINK is detached, boost will turn off .

When SINK is attached and boost turns on , the SW6008 works in SOURCE role, and will broadcast

power level of 3A. if adapter inserts in Micro-B or Lightning port and boost not turns on, the SW6008

will also broadcast power level of 3A.

9.6. BC1.2 Module

The SW6008 integrates BC1.2 controller, and automatically detects apple and samsung devices:

Apple 2.4A mode: DP=2.7V, DM=2.7V;

Samsung 2A mode: DP=1.2V, DM=1.2V;

9.7. Lightning Decryption

The SW6008 integrates lightning decryption. DPA2/DATA pin can be configured to BC1.2 function

of the expanded Type-A port or lightning decryption. This configuration is set by register in I2C mode,

and set by pin in segment/led mode. DPA2/DATA pin is set to lightning decryption when LED1/SCK

pin connects a 100KΩ resister to ground, or BC1.2 function of the expanded Type-A port.