| 전자부품 데이터시트 검색엔진 |
|
USB2524 데이터시트(PDF) 27 Page - SMSC Corporation |
|
|
|||||||||||||||||||||||||||||
USB2524 데이터시트(HTML) 27 Page - SMSC Corporation |
|
27 / 57 page ![]() USB MultiSwitchTM Hub Datasheet SMSC USB2524 27 Revision 1.91 (08-22-07) DATASHEET 7.1.4.14 Register 0Dh: Max Power For Bus Powered Operation (Reset = 0x00) 7.1.4.15 Register 0Eh: Hub Controller Max Current For Self Powered Operation (Reset = 0x00) 7.1.4.16 Register 0Fh: Hub Controller Max Current For Bus Powered Operation (Reset = 0x00) 7.1.4.17 Register 10h: Power-On Time (Reset = 0x00) 7.1.4.18 Register 11h: Language ID High (Reset = 0x00) 7.1.4.19 Register 12h: Language ID Low (Reset = 0x00) BIT NUMBER BIT NAME DESCRIPTION 7:0 MAX_PWR_BP Max Power Bus_Powered: Value in 2mA increments that the Hub consumes from an upstream port (VBUS) when operating as a bus-powered hub. This value includes the hub silicon along with the combined power consumption (from VBUS) of all associated circuitry on the board. This value also includes the power consumption of a permanently attached peripheral if the hub is configured as a compound device, and the embedded peripheral reports 0mA in its descriptors. BIT NUMBER BIT NAME DESCRIPTION 7:0 HC_MAX_C_SP Hub Controller Max Current Self-Powered: Value in 2mA increments that the Hub consumes from an upstream port (VBUS) when operating as a self- powered hub. This value includes the hub silicon along with the combined power consumption (from VBUS) of all associated circuitry on the board. This value does NOT include the power consumption of a permanently attached peripheral if the hub is configured as a compound device. Note: The USB 2.0 Specification does not permit this value to exceed 100mA BIT NUMBER BIT NAME DESCRIPTION 7:0 HC_MAX_C_BP Hub Controller Max Current Bus-Powered: Value in 2mA increments that the Hub consumes from an upstream port (VBUS) when operating as a bus- powered hub. This value will include the hub silicon along with the combined power consumption (from VBUS) of all associated circuitry on the board. This value will NOT include the power consumption of a permanently attached peripheral if the hub is configured as a compound device. BIT NUMBER BIT NAME DESCRIPTION 7:0 POWER_ON_TIME Power On Time: The length of time that is takes (in 2 ms intervals) from the time the host initiated power-on sequence begins on a port until power is good on that port. System software uses this value to determine how long to wait before accessing a powered-on port. BIT NUMBER BIT NAME DESCRIPTION 7:0 LANG_ID_H USB LANGUAGE ID (Upper 8 bits of a 16 bit ID field) BIT NUMBER BIT NAME DESCRIPTION 7:0 LANG_ID_L USB LANGUAGE ID (lower 8 bits of a 16 bit ID field) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |