PCF85263ATSLASHA datasheet(12/92 Pages) NXP

12 / 92 page

NXP Semiconductors

PCF85263A

Tiny Real-Time Clock/calendar with alarm function, battery switch-over, time stamp input, and I2C-bus

ground. The oscillator is considered to be stopped during the time between power-on and

stable crystal resonance. This time can be in the range of 200 ms to 2 s depending on

crystal type, temperature, and supply voltage.

The status bit remains set until cleared by command (see Figure 10). If the bit cannot

be cleared, then the oscillator is not running. This method can be used to monitor the

oscillator and to determine if the supply voltage has reduced to the point where oscillation

fails.

aaa-009576

OS = 1 and bit can not be cleared

VDD

oscillation

oscillation now stable

OS bit cleared

by software

OS bit set when

oscillation stops

OS flag

OS = 1 and bit can be cleared

Figure 10. OS status bit

7.2.3 EMON: event monitor

The EMON can be used to monitor the status of all the flags in the Flags register, see

Section 7.14. When one or more of the flags is set, then the EMON bit returns a logic 1.

The EMON bit cannot be cleared. EMON returns a logic 0 when all flags are cleared.

See Figure 23 for a pictorial representation.

7.2.4 Definition of weekdays

Definition may be reassigned by the user.

Bit

Day

Sunday

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Table 9. Weekday assignments

PCF85263A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 5 — 1 February 2021

12 / 92

PCF85263AT/A 데이터시트(PDF) 12 Page - NXP Semiconductors

PCF85263AT/A 데이터시트(HTML) 12 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

데이터시트 다운로드

링크 URL