NXP Semiconductors

UM11597

PCF2131-ARD evaluation board

Figure 9. PCF2131-ARD daughterboard / IMXXRT1050 EVK board, during operation

6.1.2 Using PCF2131-ARD with LPCXpresso55S69 development board

Figure 10 shows the required hardware for operation of the PCF2131-ARD and

LPCXpresso55S69 EVK board. This configuration consists of:

• One LPCXpresso55S69 EVK board

• One PCF2131-ARD daughterboard

• One USB-A / USB Micro-B cable

• A PC with Windows 10 operating system

The LPCXpresso55S69 development board is equipped with four USB Micro-B

connectors: P5, P6, P9 and P10. The board can be powered through any USB port.

Using P6 USB connector to connect the board to the PC simplifies the start-up operation

because P6 is designated for debugging and the USB cable thus accomplishes two tasks

at the same time: powering the board, and serving as a data link between the EVK board

and PC. For more details regarding power-up and operation of the LPCXpresso55S69

development board, see the LPCXpresso55S69/LPCXpresso55S28 Development Board

User Manual https://www.nxp.com/design/development-boards/lpcxpresso-boards/

lpcxpresso55s69-development-board:LPC55S69-EVK.

UM11597

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2021. All rights reserved.

User manual

Rev. 1.0 — 15 September 2021

15 / 31