M28W160BT datasheet(39/45 Pages) STMICROELECTRONICS

39 / 45 page

39/45

M28W160BT, M28W160BB

APPENDIX C. FLOWCHARTS AND PSEUDO CODES

Figure 20. Program Flowchart and Pseudo Code

Note: 1. Status check of b1 (Protected Block), b3 (VPP Invalid) and b4 (Program Error) can be made after each program operation or after

a sequence.

2. If an error is found, the Status Register must be cleared before further Program/Erase Controller operations.

Write 40h or 10h

AI03538b

Start

Write Address

& Data

Read Status

YES

b7 = 1

YES

b3 = 0

b4 = 0

VPP Invalid

Error (1, 2)

Program

Error (1, 2)

program_command (addressToProgram, dataToProgram) {:

writeToFlash (any_address, 0x40) ;

/*or writeToFlash (any_address, 0x10) ; */

do {

status_register=readFlash (any_address) ;

/* E or G must be toggled*/

} while (status_register.b7== 0) ;

if (status_register.b3==1) /*VPP invalid error */

error_handler ( ) ;

YES

End

YES

b1 = 0

Program to Protected

Block Error (1, 2)

writeToFlash (addressToProgram, dataToProgram) ;

/*Memory enters read status state after

the Program Command*/

if (status_register.b4==1) /*program error */

error_handler ( ) ;

if (status_register.b1==1) /*program to protect block error */

error_handler ( ) ;

}

M28W160BT 데이터시트(PDF) 39 Page - STMicroelectronics

M28W160BT 데이터시트(HTML) 39 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

데이터시트 다운로드

링크 URL