| 전자부품 데이터시트 검색엔진 |
|
STM32F101X4 데이터시트(PDF) 49 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F101X4 데이터시트(HTML) 49 Page - STMicroelectronics |
|
49 / 87 page ![]() DocID15058 Rev 6 49/87 STM32F101x4, STM32F101x6 Electrical characteristics 86 5.3.9 Memory characteristics Flash memory The characteristics are given at TA = –40 to 85 °C unless otherwise specified. 5.3.10 EMC characteristics Susceptibility tests are performed on a sample basis during device characterization. Functional EMS (Electromagnetic susceptibility) While a simple application is executed on the device (toggling 2 LEDs through I/O ports). the device is stressed by two electromagnetic events until a failure occurs. The failure is indicated by the LEDs: • Electrostatic discharge (ESD) (positive and negative) is applied to all device pins until a functional disturbance occurs. This test is compliant with the IEC 61000-4-2 standard. • FTB: A Burst of Fast Transient voltage (positive and negative) is applied to VDD and VSS through a 100 pF capacitor, until a functional disturbance occurs. This test is compliant with the IEC 61000-4-4 standard. A device reset allows normal operations to be resumed. tLOCK PLL lock time - - 200 µs Jitter Cycle-to-cycle jitter - - 300 ps 1. Based on device characterization, not tested in production. 2. Take care of using the appropriate multiplier factors so as to have PLL input clock values compatible with the range defined by fPLL_OUT. Table 26. PLL characteristics (continued) Symbol Parameter Value Unit Min(1) Typ Max(1) Table 27. Flash memory characteristics Symbol Parameter Conditions Min(1) 1. Guaranteed by design, not tested in production. Typ Max(1) Unit tprog 16-bit programming time TA = –40 to +85 °C 40 52.5 70 µs tERASE Page (1 KB) erase time TA = –40 to +85 °C 20 - 40 ms tME Mass erase time TA = –40 to +85 °C 20 - 40 ms IDD Supply current Read mode fHCLK = 36 MHz with 1 wait state, VDD = 3.3 V -- 20 mA Write / Erase modes fHCLK = 36 MHz, VDD = 3.3 V -- 5 mA Power-down mode / Halt, VDD = 3.0 to 3.6 V - - 50 µA Vprog Programming voltage - 2 - 3.6 V |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |