DAC39RF10 datasheet(122/232 Pages) TI2

부품명	DAC39RF10

상세설명	DAC39RFx10-SP DAC39RFx10-SEP 10.4 or 20.8GSPS, 16-bit, Dual and Single Channel, Multi-Nyquist Digital-to-Analog Converter (DAC) with JESD204C Interface

PDF	232 Pages

Scroll/Zoom	100%

제조업체	TI2 [Texas Instruments]

홈페이지	https://www.ti.com

Logo

122 / 232 page

7.4.1 DUC and DDS Modes

The device contains a DUC mode and a direct digital synthesis (DDS) mode. The data path mode uses complex

(I and Q) data from the JESD interface, interpolates and upconverts it in the DUCs, sums the DUC outputs and

generates the analog signal in the DAC. In DDS mode, the DUC NCOs are used directly to generate tones

without requiring input data.

The list below summarized how DDS mode differs from DUC mode:

1. Interpolation filters are not enabled

2. JESD204C interface is not enabled

3. NCOs use less power (no complex mixing)

4. AMP register supplies unique amplitudes for each DUC (DDS) channel, allowing DDS channels to generate

tones to cancel harmonic tones in the DAC output. For example, DDS channel 0 could produce a

fundamental tone, channel 1 could produce a tone to cancel HD2, and channel 2 could produce a tone

to cancel HD3.

5. The JMODE and DUC_L registers are ignored and the SYSREF period constraints imposed by the

JESD204C system and interpolation filters are removed. See Table 7-3.

DAC39RF10-SP, DAC39RF10-SEP

DAC39RFS10-SP, DAC39RFS10-SEP

SBAS932A – MARCH 2024 – REVISED FEBRUARY 2026

www.ti.com

122

Submit Document Feedback

Product Folder Links: DAC39RF10-SP DAC39RF10-SEP DAC39RFS10-SP DAC39RFS10-SEP

DAC39RF10 데이터시트(PDF) 122 Page - Texas Instruments