3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GENERAL SAFETY RULES

Before using this equipment it is in your own interest to read and pay attention

to the following safety rules.

1. Keep the work area clean. Cluttered areas invite injuries. Keep work area

well lit.

2. Keep children away. Children must never be allowed in the work area.

3. Store idle equipment. When not in use, tools should be locked up in a dry

location. Always lock up tools and keep out of reach of children.

4. Use eye protection. Always wear approved safety goggles.

5. Stay alert. Watch what you are doing, use common sense. Do not operate

any tool when you are tired.

6. Check for damaged parts. Before using any tool, any part that appears

damaged should be carefully checked to determine that it will operate

properly and perform its intended function.

7. Do not operate any tool if under the influence of alcohol or drugs. If there is

any doubt, do not operate the tool.

COMPRESSED AIR EQUIPMENT

1. Compressed air can be dangerous. Ensure that you are thoroughly familiar

with all precautions relating to the use of compressors and a compressed

air supply.

2. Never direct a jet of compressed air at people or animals.

3. Always ensure that the equipment being used has a safe working pressure

exceeding the output pressure of the compressor that it is connected to.

4. Always ensure that the air supply is turned off at the tool outlet and vent all

compressed air from within the air hose and the equipment attached to it,

before disconnecting air hoses or other equipment from your compressor.

5. Ensure all fixed airline connections are properly sealed using teflon tape or

pipe sealant.

6. Never exceed the operating pressure of 50 psi.

PAINT SPRAYING EQUIPMENT

We strongly recommend that paint spraying equipment be used in

conjunction with appropriate eye and face protecting goggles, glasses or

spray masks available from most DIY and hardware stores.

1. Always keep the equipment perfectly clean. This will not only prolong its life

but will also ensure you get the best results. See Maintenance.