 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
ES9039Q2M 데이터시트(PDF) 13 Page - ESS Technology,Inc |
|
|
|||||||||||||||||||||||||||||
ES9039Q2M 데이터시트(HTML) 13 Page - ESS Technology,Inc |
|
|
13 / 107 page  VERSION 0.2.2 13 ESS TECHNOLOGY, INC. 109 Bonaventura Drive, San Jose, CA 95134, USA Tel (408) 643-8800 • WWW.ESSTECH.COM ES9039Q2M Product Datasheet Design Information Each hardware mode pain can be configured with either a pull-up or pull-down resistor. Therefore, it is important that the pin is configured to allow for the desired hardware modes. Some guidelines include the following: • The HW0 and HW1 pins never require a pull up or pull-down resistor. HW2/ MODE AVDD or GPIO 47k HW2/ MODE 47k Pull-up Pull-down GND or GPIO Figure 3 - Hardware Mode Pin Configurations Muting MUTE_CTRL (Pin 20) is used to control the muting of the output and enabling of the Automute feature while in Hardware Mode: HW MUTE Control (Pin 20) Condition 0 Output Muted, No Automute 1 Output Unmuted, No Automute Pull 0 Output Muted, Automute Enabled Pull 1 Output Unmuted, Automute Enabled Table 6 - Mute Control for HW Mode Configuration |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
