12

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

USING THE WORK LIGHT

1. Press the TEST / USB / LAMP button

for 3 seconds and release to

switch on the work light and

enable the USB port. If the battery

can deliver less than 10 volts the

light and USB port will switch off

automatically.

2. Press and release the button

again; the work light will flash for

alert use.

3. Press and release the button again, the work light will shut off.

4. Recharge the jump starter as soon as possible after extensive use of the

work light.