11

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

6. Alternatively, charge the unit from the 12-volt outlet in the vehicle by

plugging one end of the DC charging cable into the jump start charging

socket and the other end into the running vehicle’s cigarette lighter.

CHARGE STATUS

When pressing the battery test button, the battery level can be shown at a

High Charge status. This does not necessarily indicate that the battery is fully

charged.

To be at the fully charged level, the green FULL CHARGE light on the front

panel will turn on during the charging process, indicating Full Charge status.

MAINTENANCE

ALWAYS inspect the jumpstart before use to ensure the cables are in perfect

condition and the clamps are clean and free from corrosion.

Keep the unit clean by wiping with a dry cloth. DO NOT use solvents as a

cleaning agent.

Keep the unit at HIGH or FULL CHARGE status at all times. Refer to the

“RECHARGING“ section on page 11.

ALWAYS turn the jumpstart OFF during storage and store the unit in an upright

position, away from direct sunlight, moisture or sources of extreme heat or

cold.

NEVER attempt any repair unless your are a qualified technician. If you have a

problem with the machine contact your local CLARKE dealer.

Your CLARKE jumpstart has been designed to give long and trouble free

service. If, however, having followed the instructions in this booklet carefully,

you encounter problems, take the unit to your local CLARKE dealer.