Test Prods

Tests prods are designed for connection to cable by soldering or crimping -

depending on the metal inserts used. Crimping is the preferred type of connection,

but it requires special tooling, so most customers buy prods ready assembled onto

cable. These products are rated at 1KV CAT III. Ratings of 2, 3 or 4KV are possible on

TPR/2 depending on construction used and EN61010 norms applied. Standard colours

are Black and Red. Other colours subject to quantity.

TPR/1 - Test probe. 1KV CAT III

with tip cover fitted,

CAT II without, for direct cable connection. Unfused.

Supplied with removeable tip cover.

TPR/1C - As TPR/1 but supplied unassembled, with

collet cable clamp.

TPR/2

Fused test probe 1KV CAT III, for either direct cable

connection or 4mm socket connection.

TPR/2S

As TPR/2 but with retractable spring loaded shroud,

exposing 4mm lantern probe.

TPR/2 CROC CLIP ATTACHMENT

This is for converting TPR/2 into a fused croc clips for

direct cable connection. 600V CAT III / 1KV CAT II .

CLIFF

TPR/1S - Spiked test probe. Unfused. Has 4mm.

shrouded socket connection, so converts 4mm.

shrouded plug into a test prod lead. 1KV CAT III

with cover fitted, CAT II without,

TPR/1SL - Lantern contact test probe. Unfused. Has

4mm. shrouded socket connection, so converts 4mm.

shrouded plug into a test prod lead. 1KV CAT III

with

tip cover fitted, CAT II without,

TPR/2F

4KV CAT II version of TPR/2.

TPR/2FS

As TPR/2F but with spring loaded retractable shroud.