| 전자부품 데이터시트 검색엔진 |
|
7112963 데이터시트(PDF) 3 Page - Whirlpool. |
|
|
|||||||||||||||||||||||||||||
7112963 데이터시트(HTML) 3 Page - Whirlpool. |
|
3 / 23 page ![]() 3 Specifications & Performance Claims Questions? Call Toll Free 1-866-986-3223 Monday- Friday, 8 AM - 7 PM EST or visit www.ecodynewatertreatment.com When you call, please be prepared to provide the model and serial number, found on the rating decal, typically located on the rim below the salt lid hinges. *Capacity to reduce clear water iron is substantiated by WQA test data. State of Wisconsin requires additional treatment if water supply contains clear water iron exceeding 5 ppm. **Canada working pressure limits: 1.4 - 7.0 kg/cm2. This system conforms to NSF/ANSI 44 for the specific performance claims as verified and substantiated by test data. Variable Salt Dose: The salt dose is selected by the electronic controls at regeneration time based on the amount needed. Model WHES40 Model Code LL40 Rated Softening Capacity (Grains @ Salt Dose) 11,900 @ 2.4 lbs. 31,600 @ 9.0 lbs. 40,000 @ 15.5 lbs. Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose) 4,958 @ 2.4 lbs. Water Used During Regeneration @ Minimum Salt Dose 3.0 gal./1,000 grains Total Water Used Per Regeneration @ Maximum Salt Dose 37.1 gallons Rated Service Flow Rate 8.5 gpm Amount of High Capacity Ion Exchange Resin 1.14 cu. ft. Pressure Drop at Rated Service Flow 11.0 psig Water Supply Max. Hardness 125 gpg Water Supply Max. Clear Water Iron 10 ppm* Water Pressure Limits (minimum / maximum) 20 - 125 psi** Water Temperature Limits (minimum / maximum) 40 - 120 °F Minimum Water Supply Flow Rate 3 gpm Maximum Drain Flow Rate 2.0 gpm Salt Storage Capacity 200 lbs. This model is efficiency rated. The efficiency rating is valid only at the minimum salt dose. The softener has a demand initiated regeneration (D.I.R.) feature that complies with specific performance specifications intended to min- imize the amount of regenerant brine and water used in its operation. This softener has a rated softener efficiency of not less than 3,350 grains of total hardness exchange per pound of salt (based on sodium chloride) and shall not deliver more salt than its listed rating or be operated at a sustained maximum service flow rate greater than its listed rating. This softener has been proven to deliver soft water for at least ten continuous minutes at the rated service flow rate. The rated salt efficiency is measured by laboratory tests described in NSF/ANSI Standard 44. These tests represent the maximum possible efficiency that the system can achieve. Operational efficiency is the actual efficiency after the system has been installed. It is typically less than the rated efficiency, due to individual application factors including water hardness, water usage, and other contami- nants that reduce a softener's capacity. |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |