Standards

UL and cUL Listed; FCC part 15 (Class B)

for home and office use

Input

120 or 277 Vac±10% 60 Hz

Output

120 Vac, 1000 W max. tungsten incandescent

load; 1000 VA max. ballast load; ¼ HP max. motor

load; 277 Vac; 1800 VA max. ballast load

Temperature

0 to 50 °C (32 to 122 °F)

Humidity

Max. 90% RH non-condensing

WARRANTY

Limited Warranty

5 years

AGENCY APPROVALS

Top View

35 ft

(10.7m)

10 ft (3.1m)

15 ft (4.6m)

25 ft (7.6m)

35 ft

(10.7m)

Side View

4 ft

(1.2m)

Minor Motion

Major Motion

The MSB Series employs the latest passive infrared (PIR) technology

to automatically control lighting for areas up to 1000 square feet,

achieving energy savings and convenience.

Each sensor employs a special 180° multi-segmented lens and PIR

motion detector circuit to sense when a person enters the area and

automatically activate the lights. The sensor will automatically switch

the lights off after a preset delay if motion is no longer detected.

The MSB Series fits in place of existing wall switches, connecting to

existing wiring, similar to a typical wall switch. The MSB Series is the

simplest way to achieve energy saving lighting control with minimal

installation time.

To assure long relay life, the MSB Series employs a low energy switch

circuit to assure maximum contact life. These sensors are compatible

with electronic and magnectic ballast loads.

MSBP

SPECIFICATIONS

MSB SERIES

Coverage Patterns

Adjustable

Adjustable time delay

Line powered

No separate supply needed

Bypass button

Bypass button for “always

on” operability…simpilifies

commissioning 180-degree

motion detection

Ballast

compatibility

Compatible with magnetic and

electronic ballasts…provides

ultimate flexibility

180 degrees

180-degree motion detection

Loading

No minimum loading

requirement

APPLICATIONS

• Lighting control for LEED*

programs and reduced energy

usage

• Use in offices, copy rooms,

common building areas,

storage closets, small

conference rooms, and more

• Fits in place of existing wall

switches connecting to the

existing active line and ground

wiring…great for

retrofit installations

*Leadership in Energy and Environmental Design (LEED) is a registered mark of the US

Green Building Council

800.354.8556 | +1 503.598.4564 | sales@veris.com | intl@veris.com | veris.com

Occupancy Sensors | Wall Switch Occupancy Sensors

MSB SERIES

Employs a Low-Energy Switch Circuit

to Maximize Contact Life

HQ0001802.H 0321