5

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATION

1. Unscrew the handle and pump

assembly in order to fill the

container with the desired liquid.

2. Screw the pump and handle

assembly back on firmly.

3. Release the carrying lugs from the

pump body by twisting the handle

anticlockwise.

4. Pressurise the container by

pumping the handle.

5. Squeeze the trigger to begin

spraying. When the spray

weakens, pump the handle to re-

pressurise the container.

6. Push the trigger forward to lock in

position to maintain a constant

spray without needing to hold the

trigger. Slide the trigger back to

release.

7. Adjust the width of the spray by

twisting the tip of the nozzle.

8. If leaks or poor delivery are experienced, always check the connections.

9. Push the pump handle downward and twist left or right to engage the

carrying lugs in the cap when lifting the unit.

AFTER USE

After use, the sprayer should be flushed thoroughly with clean water to avoid

the possibility of blockages from product residue or any cross-contamination

between different products.

Store in a cool place out of reach of children.

If not used for long periods or used continuously for several days, add a light

smear of vaseline to the sealing washers and moving parts to reduce wear

and assist free movement.

Always release any pressure before storage.