13

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MAINTENANCE

BEFORE USE

1. Ensure all fixing screws remain tight to maintain a safe working condition.

2. Inspect the power cable to ensure it is sound and free from cracks, bare wires etc.

CLEANING

1. Ensure all air ventilation slots are clear of blockages, (use compressed air to clean

the machine if possible).

2. After use, clean all dust and swarf from the drill.

3. Clean the exterior of the drill with a soft cleaning cloth. Never use any chemicals

or harsh abrasives to clean the tool.

• Avoid using solvents when cleaning plastic parts, most plastics are

susceptible to damage from the various types of commercial solvents.

GENERAL MAINTENANCE

• All bearings etc, in this tool are lubricated with a sufficient amount of high

grade lubricant for the tools lifetime under normal operating conditions,

therefore no further lubrication is necessary.

• Refer to your CLARKE dealer if internal maintenance is required.

INDICATORS

The Green indicator is a 'Power present'

indicator. This illuminates when the

product is plugged into a live socket.

The Red indicator is a brush wear

indicator. It illuminates when the motor

brushes need replacing, Refer to your

clarke dealer.

WARNING: MAKE SURE THAT THE 5 FUNCTION ROTARY HAMMER

DRILL IS SWITCHED OFF AND DISCONNECTED FROM THE MAINS

SUPPLY BEFORE STARTING ANY CLEANING OR MAINTENANCE

PROCEDURES.