AS1111B-BWLT datasheet(2/23 Pages) AMSOSRAM

2 / 23 page

ams Datasheet

Page 1

[v1-06] 2015-Apr-07

Document Feedback

AS1111

Low–Dropout LED Drivers

The AS1111A/AS1111B/AS1111C are LED drivers designed to

match current source bias for any color LED, including white

and blue. The devices can drive up to 4 high-current LEDs, and

the LED current is programmable using an external resistor

(RSET).

The AS1111A LED currents are 460 x ISET (per LED, typ) at an LED

cathode voltage (VSAT) of 150mV and 650 x ISET (typ) at a VSAT

of 1V, where ISET is the current through RSET connected to pin

CTRL.

The AS1111B & AS1111C LED currents are

230 x ISET (per LED, typ) at a VSAT of 150mV and 325 x ISET (typ)

at a VSAT of 1V.

All AS1111 versions incorporate a chip-enable feature via pin

EN. When the devices are disabled, the supply current drops

down to less than 1

μA. The AS1111A and AS1111B are available

in a 6-pin WL-CSP package with 0.4mm pitch. The AS1111C is

available in an 8-pin MLPD (2x2mm) package with 0.5mm pitch.

Ordering Information and Content Guide appear at end of

datasheet.

Key Benefits & Features

The benefits and features of AS1111, Low–Dropout LED Drivers

are listed below:

Figure 1:

Added Value of Using AS1111

Benefits

Features

High efficient

• Ultra Low Voltage Drop: less than 150mV

Supports a variety of end applications

• Analog and PWM Brightness Control

• Up to 80mA per LED (AS1111A)

• Up to 40mA per LED (AS1111B, AS1111C)

Extended battery life

• Active-Low Shutdown Mode

• Low Shutdown Current: less than 1

μA

Suitable for EMF sensitive environment

• No electromagnetic interference

• No switching noise

Small PCB area

• Less external components needed

Cost effective, small package

• 6-pin WL-CSP with 0.4mm pitch

• 8-pin MLPD (2x2mm) with 0.5mm pitch

General Description

AS1111B-BWLT 데이터시트(PDF) 2 Page - ams-OSRAM AG

AS1111B-BWLT 데이터시트(HTML) 2 Page - ams-OSRAM AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

데이터시트 다운로드

링크 URL