Direct Mount

1.Place the Mounting Bracket on the even surface.

2.Be sure to remove the waterproof packing from the Mounting Bracket.

3.Knock out the three knock-out holes with a steel punch, etc.

4.Insert the hexagon bolt into the knockout holes and affix with the flanged nuts.

5.Insert the waterproof packing.

Pole Installation

1.Be sure to remove the waterproof packing from the Mounting Bracket.

2.Install the Pole Waterproof Ring in the Mounting Bracket.

Check that the 2 ribs are on the outside.

3.Insert Pole into the Mounting Bracket.

See the figure on the left for details on the directon of insertion.

4.Tighten the Binding Head Tapping Screws (2 pcs.) from the

topside of the Mounting Bracket.

Drawing No.

Rev.

Page

LR-502-W18

I

KT

(Unit:mm)

KT

10/15