LDTC-LAB datasheet(14/31 Pages) WAVELENGTH

14 / 31 page

SETTINGS SCREEN

1. Press to access the Settings Screen.

2. Press the

Display value to cycle through the

display and control temperature units available

- Celsius (°C), Fahrenheit (°F), Kelvin (K) or

Sensor Raw.

3. Press either

Tolerance value and turn the adjustment

knob until the desired tolerance window is displayed. A

green target symbol will show on the front panel when

the actual temperature is within the window defined by

setpoint ± the tolerance for the specified amount of time.

4. Move the slider bar on the touchscreen to change the

Display Brightness.

5. Press the blue text to toggle the

Beeper setting.

Figure 19. Settings Screen

SAVE/RECALL OPERATIONAL

PARAMETERS

1. Access the Settings Screen.

2. Press to access the Save/Recall Screen.

3. Under

Save Settings to, press

the blue text to toggle through the

Profile options, select one, and

then press the

Save icon.

The following operational parameters are saved:

TC PARAMETERS

LD PARAMETERS

Tune Mode

Control Mode

Temperature Setpoint

Laser Setpoint

Current Limit, Negative

Current Limit

Current Limit, Positive

Max Laser Voltage

Sensor

PD Range

Sensor Bias Current

PD Transfer Function

High Temperature Limit

PD Bias Voltage On/Off

Low Temperature Limit

On Delay Time

Proportional Gain

Cable Resistance

Integrator Time Constant

Laser Type

Differentiator Time Constant

Tolerance

Temperature Units

Cable Resistance

Voltage Limit

GENERAL PARAMETERS

Beeper Mute Status

Display Brightness

Under

Recall Settings from, press the blue text

to toggle through the saved Profile options, and

then press the

Recall icon to recall the saved

settings. Select Factory Profile to restore the settings to the

factory defaults. Note that the Factory Profile is not editable.

Profile names can be set via remote command.

Figure 20. Save / Recall Screen

LDTC-LAB 데이터시트(PDF) 14 Page - Wavelength Electronics, Inc.

LDTC-LAB 데이터시트(HTML) 14 Page - Wavelength Electronics, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

데이터시트 다운로드

링크 URL