QCL-LAB079 datasheet(21/29 Pages) WAVELENGTH

부품명	QCL-LAB079

상세설명	Low-Noise QCL Driver — Laboratory

PDF	29 Pages

Scroll/Zoom	100%

제조업체	WAVELENGTH [Wavelength Electronics, Inc.]

홈페이지	https://www.teamwavelength.com/

Logo

21 / 29 page

ENABLE OR DISABLE CURRENT TO

THE LASER

Current to the laser can be enabled or disabled using a

remote computer. When the current is enabled, the Enable

button glows blue.

•

On the

Instrument Operation tab, click the Enable

button.

Figure 30. Enable button on Figure 31. Enable button off

RUN A VI SCAN

1. On the

Instrument Operation tab, click the green arrow.

Specify Data File window opens.

2. Navigate to the location to save the scan data, name the

file as desired, and click

Save.

3. A new window opens showing the scan in progress.

•

To stop the scan, click

Stop Scan. Data collected up

to the point the scan was stopped is recorded in the

data file.

4. To dismiss the scan window, click

Close.

Figure 32. VI Scan screen

END REMOTE OPERATION

Returning the instrument to local operation is accomplished

one of two ways:

•

On the

Instrument Operations tab and at the bottom,

click

Close Instrument.

•

On the instrument, tap

Press For Local.

QCL-LAB079 데이터시트(PDF) 21 Page - Wavelength Electronics, Inc.