3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY INSTRUCTIONS

GENERAL

1. Read all instructions before use

and save these instructions for

future use.

2. An approved residual current

device (RCD) which has a

tripping current of less then 30mA

MUST be used for all operations.

3. The electrical supply must be the

same as that on the rating plate.

4. ALWAYS make sure that your

hands are dry when connecting

or disconnecting from the mains

supply.

5. NEVER pull the mains lead to

disconnect the pump from the

mains socket.

6. The mains plug must be kept

away from the water at all times.

7. DO NOT allow children or

unauthorised people to touch the

pump, cables or connections.

8. Disconnect the pump from the

mains supply when not in use.

9. If necessary have the pump

repaired by a qualified person.

10. Keep the mains lead away from

heat, oil and sharp edges.

11. If you have to use an extension

lead with this product, it must be

designed for outdoor use and

incorporate a cable suitable for

use with Class I appliances.

12. Disconnect the pump from the

electrical supply and wear gloves

during servicing or maintenance.

PUMP SPECIFIC

1. DO NOT pump explosive /

flammable liquids or chemicals.

2. NEVER allow the pump to run dry

or operate out of the water.

3. Submersible pumps should always

be submerged and stored

vertically.

4. Disconnect the pump from the

mains supply before placing it

into or removing it from the water.

5. ALWAYS check the plug, mains

cable and float switch cable for

damage before use.

6. DO NOT use the pump if

damaged. Refer to qualified

service personnel for repair.

7. NEVER carry the pump by the

power cable or float switch

always use the handle or a rope

tied securely to the handle.

8. NEVER insert your fingers into the

pump whilst it is connected to the

mains.

9. NEVER use the submersible pump

in a swimming pool when there

are people or animals in the pool.

10. Keep the pump clear of any

sediment by standing it on a

platform or brick or suspending it

at a suitable depth.

11. DO NOT use the pump if the

water is liable to freeze, as this

can cause damage to the pump.

Remove the pump from the

water and store it in a frost free

location.